Our Brands

Blue Hawaiian Fiberglass Pools
2016 Pool Photo Contest


Hurry! Contest ends November 15, 2016


Photography Recommendations

  • Photo should be high-resolution
  • Photo should not include people
  • If the pool features an automatic safety cover, close it halfway to feature it
  • Deck should be clean and clutter-free
  • Remove any pool toys or cleaning equipment
  • Shoot your shot with the Pool in the foreground and the home in the background


Photography Release Information

A photography release form is required to accompany every photo submission.

Download Release Form


Ready to Submit?

STEP 1: Read the Rules & Regulations

STEP 2: Download & Fill out the Release Form
(Note: Each Photo Submission must have an accompanying Release Form)

STEP 3: Fill out the form below


Trilogy Fiberglass Pools
2016 Pool Photo Contest


Hurry! Contest ends November 15, 2016


Photography Recommendations

  • Photo should be high-resolution
  • Photo should not include people
  • If the pool features an automatic safety cover, close it halfway to feature it
  • Deck should be clean and clutter-free
  • Remove any pool toys or cleaning equipment
  • Shoot your shot with the Pool in the foreground and the home in the background


Photography Release Information

A photography release form is required to accompany every photo submission.

Download Release Form


Ready to Submit?

STEP 1: Read the Rules & Regulations

STEP 2: Download & Fill out the Release Form
(Note: Each Photo Submission must have an accompanying Release Form)

STEP 3: Fill out the form below


Info
Dates
Location
Reserve Today
Schedule

Info



Dates


  • December 13-15
  • March 14-16

Location



Reserve


Give us a call at 1-800-989-4926
or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.


Schedule


Day 1

1:00pm – 6:30pm

  • Registration (Sign-in, Settle in)
  • Welcome, Introductions
  • Automatic Safety Covers Overview
  • Anatomy of a System
  • System Types
  • Pool Requirements
  • Measuring and Squaring of Track and System
  • Installation of a Deck Mount, Top Track System
  • Electrical Connections
  • Adjustments, Open & Close
  • Bench Installation

7:00pm – 9:00pm

  • Dinner

Day 2

7:00am – 8:00am

  • Breakfast at Hotel
  • Commute to Training
  • Sign-in, Settle-in

8:00am – 6:00pm

  • Prior Day Review and Day 2 Overview
  • Installation of Recessed Undertrack System for Vinyl Liner Pool
    • Installing Vacuum Formed Housing
    • Installing Retainer and Coping
    • Installing Lids
  • Lunch
  • Installation of Recessed Undertrack System for Fiberglass/Gunite Pool
    • Installing Vacuum Formed Housing
    • Installing Retainer and Coping
    • Installing Lids
  • Wiring Motors and Sensors
  • Installation of System and Adjustments
  • Discussion and Review

7:00pm – 9:00pm

  • Dinner

Day 3

7:00am – 8:00am

  • Breakfast at Hotel
  • Commute to Training
  • Sign-in, Settle-in

8:00am – 1:00pm

  • Prior Day Review and Day 3 Overview
  • Servicing Automatic Safety Cover Systems
    • Installing Replacement Covers
    • Regular Service Items
    • Common Repairs
  • Water Chemistry
  • Selling Automatic Safety Covers
  • Ordering Automatic Safety Covers
  • Written Test and Certification

1:00pm

  • Departure
Swimming Pool FAQs
Safety Cover FAQs
Polymer Step FAQs

Swimming Pool FAQ



Why do I need to shock my pool?

Pool water composition always includes some undesirable elements that actually contaminate the water and reduce the efficiency of the disinfectant or sanitizer. Material such as hair spray, suntan oil, cosmetics, perspiration and other organic material react to combine with the chlorine in the water to form "combined chlorine". Once "combined chlorine" forms, it acts as a very poor disinfectant, contributing to eye and skin irritations and the forming of unpleasant chlorine odor. Pools with this problem are often inaccurately accused of having too much chlorine.

Routine shock treatment is necessary to destroy combined chlorine compounds and restore the chlorine sanitizer to "free chlorine" efficiency. A pool can be shock treated by adding large doses of chlorine, commonly referred to as super chlorination, or by adding a non-chlorine shock.

Return to Top


My pool has a very strong chlorine odor. Is there too much chlorine in my pool?

No, you don't have enough "free chlorine" in your pool. Most pools contain both good chlorine and bad chlorine. The good chlorine is called free chlorine and is capable of killing germs. Bad chlorine, on the other hand, is called "combined chlorine" and is a poor germ killer.

Too much combined chlorine in your pool causes the strong chlorine odor. When the combined chlorine level reaches 0.2 ppm or more, it is time to shock your water. Shocking will eliminate the odor.

Return to Top


When I shock my pool, should I use chlorine or non-chlorine shock?

Both treatments accomplish the goal of destroying and removing bather waste and preventing the formation of combined chlorine.

Super chlorination, the addition of large amounts of chlorine, has some drawbacks. Because it requires large amounts of chlorine, it can damage liners and swimsuits and upset water balance. Additionally, it is difficult to determine proper dosage amounts and it requires swimmers to wait until the level of chlorine drops, often a day or more, until they can swim.

Non-chlorine shock, on the other hand, does not require excessive chlorine use and allows swimming almost immediately after application, does not harm liners, has easily determined dosage rates and does not upset water balance.

Return to Top


Do I need to add a sanitizer regularly?

Yes, an E.P.A. registered sanitizer should be added and maintained at proper levels at all times. Non-chlorine shock treatments contain no chlorine, therefore you must make regular additions of sanitizer to ensure that you are disinfecting the water.

Return to Top


I have heard of people talking about pink algae. What is that and how do I treat it?

Pink algae is not an algae at all, but a bacteria. Normal algaecides will not reliably work on them. There are products that are designed to assist chlorine with removal of these bacteria. To eliminate pink algae, you must super chlorinate your pool, turn off the filter, and clean it with a good filter cleaner. Let the filter soak overnight then backwash to waste. Let the chlorine level subside before using again. (Hint: a good rule of thumb is to toss into the pool the equipment that is normally used for pool maintenance, including hoses, brushes, etc. prior to super chlorinating. These need to be disinfected too).

Return to Top


Safety Cover FAQ



Where should the water level be for closing a pool with a winter safety cover?

The water level should be kept with in 12" of the top of the pool wall.

Return to Top


What is the proper spring tension?

Initially, adjust the straps so that the springs are set to at least half compression. This will keep the cover tight and aid in draining. The springs should be checked periodically and the straps adjusted to maintain this tension.

Return to Top


Should I treat the pool with chemicals before closing?

Be sure your pool has the proper level of sanitizer and algaecide before closing it for the winter. This will insure that the water is clear upon opening in the spring. If the cover is left on when the temperature has gone beyond 60 degrees F., it may be necessary to add algaecide to maintain clarity.

Return to Top


Should I remove snow and water from the cover over winter?

Large accumulations of snow should be carefully removed, taking precautions not to damage the cover. Likewise if a large puddle of water accumulates it should be removed immediately by draining it to the drain or by using a weighted cover pump. The straps should be adjusted to prevent a reoccurrence. Failure to perform this maintenance could result in stretching or damage to the cover components. Drainage can be facilitated by slightly loosening the strap that runs through the drain areas while tightening the straps away from the drain. A small amount of puddling is normal and will evaporate in dry weather. If you have questions about these or any procedures, please contact your cover installer.

Return to Top


How does debris (leaves, pine needles, etc..) affect my cover?

Covered pools in heavily wooded areas are susceptible to accumulation of leaves, needles and other debris that will inhibit water flow to and through the "Invis-a-drain". It is very important to keep the drain clear of debris at all times.

Return to Top


How can I protect my cover from abrasive coping?

For cover not ordered with sewn on padding, it is required that our loose 2' x 20' padding be placed as a barrier between rough or sharp coping and the cover itself. Periodic inspection of the cover is necessary for detection of early signs of wear.

Return to Top


Are there any special instructions for removal and storage of the safety cover?

The cover should be hosed off removing any debris that accumulated over the winter. If you have a cover with the invis-a-drain you should clear the drain also. Before folding the cover make sure it is completely dry. Cover cleaner and treatments, available at most pool supply stores, are also recommended.

Return to Top


Do the anchors require any special care?

After removing or prior to installing the cover, clean out all the anchor sockets with a stream of compressed air or water. This biannual cleaning will assure proper anchor function. Applying spray silicone to these components will also be beneficial to their proper operation. When the cover is not in use, screw anchors down completely to keep out debris and to prevent tripping, foot injuries, and cover damage.

Return to Top


Polymer Step FAQ



Why do my steps feel spongy?

There can be a few reasons for this. The earth under the steps and or bracing could have been eroded away by water. The earth under the step could have also settled over time causing an air gap between the steps and bracing allowing the step tread to move up and down on the bracing.

Please call the warranty department for a complete listing of qualified repair technicians at 1-888-MY-POOL-2.

Return to Top


What can I do about scratches on my pool step?

Depending on the severity of the scratch, there are remedies you the home owner can do to repair the damaged area. It will depend on the size and depth of the scratch you are trying to repair. If you have a small cosmetic flaw you would like to repair these are the steps you must follow. First you must have the appropriate supplies to complete this task. They include: One can of white rubbing compound, a bottle of auto wax/polish, a mild non abrasive dish detergent, 3 clean white disposable rags, and a little elbow grease.

Step 1: Apply compound to rag or step surface. Step 2: In a linear motion in line with the scratch, apply even direct pressure moving rag back and fourth along scratch. Repeat steps 1 and 2 as many times as necessary until the scratch is removed or you are pleased with the results. Step 3: Using a fresh white rag and mild non abrasive detergent clean the affected area thoroughly. Rinse with clean water and dry area completely. Step 4: Using polish/wax and clean white rag, polish area until you have achieved the results you are aiming for. This polish/wax protective coating should be applied a few times through out the year. If you have a deep gouge in the step there are qualified step technicians that will come to your house and repair the affected area. Please call the warranty department for a complete listing of qualified repair technicians at 1-888-MY-POOL-2.

Return to Top


What do I do if my step is cracked?

Please call the warranty department for a complete listing of qualified repair technicians at 1-888-MY-POOL-2. This repair needs to be completed by a qualified repair technician.

Return to Top


Why is my step discolored?

Typically this problem is caused by improper water chemistry. The main cause of this discoloration is free metals in the water. You should bring a water sample to your local dealer for testing. They will instruct you on how to remedy the situation. Once the water is balanced the staining will dissipate with out the need for scrubbing the stain area.

Return to Top


What do I use to clean my step?

Use a clean white rag and a mild non abrasive dish detergent to clean affected area. If necessary you can also use a plastic bristled scrub brush along with mild non abrasive dish detergent.

Return to Top